Five ways to maintain hex bolts to make your hex bolts last longer

2023-02-24 18:02

The difference between explosive bolts and ordinary bolts And the application of explosive bolts

2023-01-13 15:15

What if the inner hexagon screw slips?

2023-01-06 17:44

The transformation and upgrading of the standard parts industry in Yongnian District has achieved reduction and quality improvement

2022-11-23 16:40

The "transcript" of imports and exports in the past 10 months shows the resilience of China's foreign trade.

2022-11-16 17:58

Development direction and trend of gas phase rust prevention technology for fasteners

2022-09-28 00:05

In recent years, the anti-rust packaging of foreign threaded fasteners is mainly based on the gas phase anti-rust technology. The technological development and status quo of well-known foreign fastener companies also indicate the development direction and trend of the domestic fastener industry to a certain extent.

Inventory of three methods for brightly cleaning the surface of stainless steel screws

2022-09-28 00:02

The stainless steel screws that can be seen everywhere in our lives are all seen from the exposed parts to be screws. Some screws are hidden inside the object, and the part that covers the screws is not removed.

Aspects that should be considered in the purchase of stainless steel screws

2022-09-28 00:00

Stainless steel screws are mainly used for: environmental protection equipment, medical equipment, communication equipment, power facilities, electronic products, instrumentation, food machinery, petrochemical, ship assembly, pump valve piping, building curtain walls, open air, sports facilities, outdoor decoration, etc.

Two knowledge of hardware stainless steel fasteners

2022-09-27 23:59

Fasteners are made of stainless steel. It can be said that there are great advantages in all aspects of manufacturing, use or processing. Therefore, although the cost of fasteners made of stainless steel is relatively high, the cycle life is relatively short, but in the tight Among the firmware solutions, it is still a relatively economical one.

9 factors that screw people must know that affect bolt fatigue

2022-09-27 23:58

The bolt is a typical multi-notched part, and its fatigue performance will be obviously affected by many factors such as the structure, size, material and manufacturing process of the bolt. The fatigue strength is usually significantly lower than that of notched parts of the same material.